Bearings - send image and number from the side of the bearing
$16
Brake Cable - Brake Cable - available - length of outer cover needed - Only available with single ball end (the cables with a ball at each end are not available)
$19
Brake Caliper - w/ Pads type CW
$24
Brake Caliper - w/ Pads Type CCW
$24
Brake Handle - Left Hand Brake Handle- clamp to handle bar style
$21
Brake Pads - Disk Brake Pad Pair
- Rectangle Shaped w/ rounded corners and center groove
$12
Carburetor - for 5.5hp engine - will need specifications and/ or image
$65
Carburetor Repair Kit - -
na
na
Carburetor Parts -
na
na
Chain - Available - all specifications needed - pitch & length required
$28
Chain Master - Two
Master Links - all specifications needed - pitch & length required
$9
Clutch - specifications required along with an image
$45
Cylinder -
na
na
Engine 5.5hp - Complete running
Engine w/ Intake and Exhaust - Bolt It On And Go! Does not include transmission.
$195
Ignition Coil - Spark
Plug Coil & Wire Assembly - image and distance between mounting holes required
$28
Pull Start - Complete Recoil Pull Start Assembly for your TyRod
IV Kart w/ Pull Rope Installed - Image required for verification
Sprocket - For Axle/Wheel - specifications required - (chain pitch, bolt hole patern w/ distance overall diameter) and image required
na
availble?
Throttle Cable - Replacement throttle cable
$23
Throttle - Heavy Duty Aftermarket Throttle, Clamp on type for use with round bar steering wheels - NOTE: must have bare metal rod to clamp to. if you have a round bar with padding the padding will need to be cut away
$34
Throttle - Aftermarket Throttle, bolt through handle bar type, Used with both bare and padded ( flat metal and tube type) handle bars - Note: must have a bolt hole through the bar to mount
$34
Tie Rod - Pair (left
& right tie rod)
na
na
Tire - front - available - specifications required ( numbers from the side of the tire)
email size
Tire -rear- available - specifications required ( numbers from the side of the tire)
